Redding Profile Crimp Die .38 Special/.357 Mag
$32.99
Free Shipping for orders $1000+
2 in stock
Redding Profile Crimp Die .38 Special/.357 Mag
Product description
Redding handgun cartridge crimp dies were designed for those who want the best possible crimp. Profile crimp dies provide a tighter more uniform roll type crimp and requires the bullet to be seated to the correct depth in a previous operation. These dies are not for cartridges that headspace on the case mouth.
All progressive die sets are supplied with a profile crimp die (or taper crimp die if the cartridge headspaces on the case mouth) because the best possible crimp is attained after the bullet is seated.
The design of our Profile Crimp Die is an example that came about from an attempt to help silhouette shooters solve the typical ?half moon? crimp so prevalent with magnum handgun cartridges. Redding’s solution to the problem not only solved the ugly half crimp but proved to tighten groups as well.
Additional information
| UPC | 611760862823 |
|---|---|
| Manufacturer | Redding |
| Manufacturer part number | 86282 |
Size chart
This is just a placeholder
Sometimes it’s nice to put in text just to get an idea of how text will fill in a space on your website.
CM | 22,1 | 22,5 | 22,9 | 23,3 | 23,8 | 24,2 | 24,6 | 25 | 25,5 | 26,3 | 26,7 | 27,1 | 27,6 | 28 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EUR | 36 | 36 2/3 | 37 1/3 | 38 | 38 2/3 | 39 1/3 | 40 | 40 2/3 | 41 1/3 | 42 | 42 2/3 | 43 1/3 | 44 | 44 2/3 |
UK | 3,5 | 4 | 4,5 | 5 | 5,5 | 6 | 6,5 | 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 |
US-MEN | 4 | 4,5 | 5 | 5,5 | 6 | 6,5 | 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 |
US-Women | 5 | 5,5 | 6 | 6,5 | 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 | 11 | 11,5 |
Size measurement
Choose the right size by following these simple instructions. The best time to measure your feet is in the evening.
1. Stand on a piece of paper against a wall with your heels gently touching the wall.
2. On the paper, mark where your longest finger ends (you may need someone to help you with this) and measure the distance from the mark to the wall.
3. Measure the other leg in the same way and use the measurements to select the appropriate size in our table.
