RCBS FULL LENGTH DIE SET – 5.7X28MM GP-D
$81.71
Free Shipping for orders $1000+
2 in stock
RCBS FULL LENGTH DIE SET – 5.7X28MM GP-D
Product description
FEATURES
–Caliber: 5.7X28MM
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it’s seated
| PRODUCT SPECIFICATIONS: | ||
| Dimension | 1.85 X 4.55 X 6.00 | |
| Height | 1.8500 | |
| Width | 4.5500 | |
| Length | 6.0000 | |
| CALIBER | 5.7X28MM | |
| TYPE | FULL LENGTH | |
| # OF DIES IN A SET | 2 | |
| CARBIDE Y/N | N | |
Additional information
| UPC | 076683117014 |
|---|---|
| Manufacturer | RCBS |
| Manufacturer part number | 11701 |
| Product Type | FULL LENGTH |
| Length | 6 |
| Caliber/Gauge | 5.7 x 28 mm |
Size chart
This is just a placeholder
Sometimes it’s nice to put in text just to get an idea of how text will fill in a space on your website.
CM | 22,1 | 22,5 | 22,9 | 23,3 | 23,8 | 24,2 | 24,6 | 25 | 25,5 | 26,3 | 26,7 | 27,1 | 27,6 | 28 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EUR | 36 | 36 2/3 | 37 1/3 | 38 | 38 2/3 | 39 1/3 | 40 | 40 2/3 | 41 1/3 | 42 | 42 2/3 | 43 1/3 | 44 | 44 2/3 |
UK | 3,5 | 4 | 4,5 | 5 | 5,5 | 6 | 6,5 | 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 |
US-MEN | 4 | 4,5 | 5 | 5,5 | 6 | 6,5 | 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 |
US-Women | 5 | 5,5 | 6 | 6,5 | 7 | 7,5 | 8 | 8,5 | 9 | 9,5 | 10 | 10,5 | 11 | 11,5 |
Size measurement
Choose the right size by following these simple instructions. The best time to measure your feet is in the evening.
1. Stand on a piece of paper against a wall with your heels gently touching the wall.
2. On the paper, mark where your longest finger ends (you may need someone to help you with this) and measure the distance from the mark to the wall.
3. Measure the other leg in the same way and use the measurements to select the appropriate size in our table.
